GE JBS03 Owner's Manual page 16

Using the clockand timer, ran some mode/sj
Not all features are on all models.
To Reset the Timer
If the display is still showing the time
remaining, you may change it by touching
the KITCHENTIMERON/OFFor TIMER
ON/OFF pad, then touch the + or - pads until
the time you want appears in the display.
If the remaining time is not in the display
(clock, delay start or cooking time are
in the display),recall the remaining time by
touching the KITCHENTIMERON/OFF or
TIMERON/OFF pad and then touching the
+ or - pads to enter the new time you want.
To Cancel the Timer
Touch the Kitchen Timer On/Off or TIMER
ON/OFF pad twice.
@
or
or
End of Cycle Tones (onsomemodels)
Clear the tones by pressing the pad
of the function you are using.
Power Outage
Ira flashing time is in the display, you hove
experienced o power failure. Resetthe dock.
To reset the clock, touch the CLOCK
pad twice. Enterthe correct time of day
by touching the + or - pads. Touch
the START/ONpad.
16