FujiFilm FINEPIX S4400 Series Owner's Manual page 96

U:_ ng the_Me_nus: 5 ;,ooung MoHe _
• o: CustomWhiteBalance
Choose ,o, to adjust white balance for unusual
lighting conditions. White balance measurement
options will be displayed; frame a white object so
that it fills the monitor and press the shutter but-
ton all the way down to measure white balance.
If"COMPLETED!" isdisplayed,press MENU/OK to set
white balance to the measured value. This value
can be reselected by pressing MENU/OK when cus-
tom white balance options are displayed.
If"UNDER" isdisplayed,raise exposure compensa-
tion (pg. 44) and try again.
If"OVER" isdisplayed,lower exposure compensa-
tion and try again.
%.Tip
To give a deliberate color cast to your photographs,
measure a value for custom white balance using a col-
ored instead of a white object.
Ig._SHARPNESS
Choose whether to sharpen or soften outlines.
• HARD: Use for sharp outlines when photograph-
ing such subjects as buildings and text.
• STANDARD: Standard sharpness. Best choice in
most situations.
• SOFT: U se for soft outlines in portraits and similar
subjects.
8O