FujiFilm FINEPIX S4400 Series Owner's Manual page 41

5 _,ootmgA,'_oHe
[M Cautions
• Panoramas are created from multiple frames. The
camera may in some cases be unable to stitch the
frames together perfectly.
• Tile desired results may not be achieved with mov-
ing subjects, subjects close to the camera, unvarying
subjects such as the sky or a field of grass, subjects
that are in constant motion, such as waves and wa-
terfalls, or subjects that undergo marked changes in
brightness. Panoramas may be blurred if tile subject
is poorly lit.
...................................................................................................................................................................... il
iiFor best results, be careful not to tilt the camera back-i:
ward or forward or to either side and try not to move
idle camera while @ and + are aligned to form a solid
circle.
!% Printing Panoramas i:
Depending onthepage size andthesize of tile
ipanorama, panoramas may print with their edges
cropped out o rw,th w ,de marg,ns attile top and
bottom or at both sides, i:
Follow the steps below if tile desired results are not
achieved with _ AUTO selected for [] MODE:
11
Select I_1 MANUAL for [] MODE in tile shootinc
menu _:
::12Select a frame and take the first shot.
3 PressMENU/OI(to d isplaya guide showing an edge of
the picture you havejust taken. Takethe next shot,
framing it to overlap with tile previous picture.
duide
Displayafrer lst shot Framenexrshor
_4
Repeat Step 3 to take the third shot and then press "_
25