Troubleshooting - FujiFilm FINEPIX S4400 Series Owner's Manual

Troubleshooting
Power and Battery
Problem ' Possiblecause : Solution
Tile batteries are exhausted. 8
The batteries are not in the correct orienta- 8
tion.
The camera does The battery-chamber cover is not latched. 9
not turn on. The AC power adapter and DC coupler are
not connected properly.
The camera has been left for an extended
)eriod with no batteries inserted and the
AC power adapter/De coupler unplugged.
The batteries are cold. vi
Power
supply There is dirt on the battery terminals.
The camera is in SR_i_ mode. 21
The batteries run
down quickly.
off suddenly.
The batteries are new, have been left unused
for an extended period, or have been re-
charged without first being fully discharged
(rechargeabie Ni-MH batteries only).
[] CONTINUOUS is selected for [] AF MODE.
The batteries are exhausted.
The AC power adapter or DC coupler has
been disconnected.
Insert fresh or fully-charged spare batteries.
Rednsert the batteries in the correct orienta-
tion.
Latch the battery-chamber cover.
Make sure that the AC power adapter and DC
coupler are properly connected.
After inserting the batteries or connecting the
AC power adapter/DC coupler, wait a few mo-
ments before turning the camera on.
Warm the batteries by placing them in a pocket
or other warm place and rednsert them in the
camera immediately before taking a picture.
LJean the terminals with a soft, dry cloth.
Select another shooting mode.
Discharge Ni-MH batteries using the _I DIS-
CHARGE option and recharge them in a bat-
tery charger (sold separately). If the batteries
do not hold a charge after repeated discharg-
ing and recharging, they have reached the end
of their service life and must be replaced.
Select a different focusing option.
Insert fresh or fully-charged spare batteries.
Make sure that the AC power adapter and DC
coupler are properly connected.
I05
81
8