How To Assemble - Hoover Convertible U4113001 Owner's Manual

How to assemble
Before assembly, identify the
type of handle on your cleaner:
1) Square handle with molded
grip or 2) Round handle. Then as-
semble the cleaner according to
the type of handle.
1) Square handle with
molded grip
A. Put handle together
Remove cardboard from end of
handle sections.
Slide the two handle sections to-
gether. Check to see that cord
storage hooks are on the same
side of handle. Insert bolt
through small holes and secure
with nut. Tighten nut with screw-
driver.
If the nut and bolt will not assem-
ble as shown in the illustration,
the holes in the handle are not
lined up correctly.
B. Attach handle to
the cleaner
Unscrew nut and remove bolt
from handle bail.
Connect electric plug from the
handle bail with the socket in the
handle. Make sure plug assembly
is positioned as shown.
Push handle down into place in
bail. The excess wire and electric
connection guide themselves into
the handle, Push down until han-
dle is securely in place.
€
i