Advertisement
Connection to the control signal terminal
1.
Mouse
functions
(1) Turn off the main power switches
of the projector
and computer
and connect the two units with the cable
provided
or an optional
suitable
commercially
available
cable.
Disconnect
the USB cable from the
projector.
(2) Turn on the main switch of the projector
(the ON indicator
lamp will light green).
(3) Press the 1NPUT button of the projector
or the RGB button
of the remote
control
and select the input
where the computer
is to be connected.
(4) Turn on the computer
power supply.
(5) Start the mouse function.
If the mouse has not been started, reboot the computer
(soft reboot or reboot buttons).
(6) Refer to page 10 concerning
remote control operation.
(7) Varying the force with which the DISK PAD button is pressed varies the speed of mouse operation.
PSI2 Mouse
Projector
Corn _uter
control jack
D-sub 15-pin shrink jack
1
5
0IoOOOOoO
L
11
15
CLK
DATA
SEL0
RTS
+5V
GND
Mouse jack Mini
DIN 6-pin
Use the mouse cable provided
or a PS/2 mouse cable (for IBM and compatibles).
Cables for ADB mouse (Apple),
bus mouse (NEC) and serial mouse are available
as options.
Mouse cable
Product name
Model
ADB mouse
COE-MAC (ADB)-2
SC-MA201XC
Bus mouse
COE-PC98 (BUS)-2
SC-MN201XC
Serial mouse
COE-SERIAL-2
SC-MS201XC
(Caution-)
• Before making connections,
read the instruction
manual of the equipment
to be connected.
• Turn off the projector
and computer
power supplies
before connecting.
Connecting
the mouse cable with the computer
power on can result in a malfunction.
Use the mouse cable provided
or an optional mouse cable to make the connection.
• In the case of notebook
type computers
with a built-in pointing
device such as a track ball, in
some cases the built-in
pointing
device
wilt have priority even if a mouse is connected
and
the mouse may not be selected.
In such case, disable
the built-in
pointing
device and change
the B1OS setting (system
setup)
so that an external mouse can be selected.
After changing
the B1OS setting, perform the operations
described
in (1) - (3) above.
Refer to the computer
hardware
manual concerning
the BIOS setting.
Also,
some computers
may not have a utility
program
to operate
a mouse.
Refer to the
computer
hardware
manual.
26
Advertisement
