Advertisement
Connecting the USB
1. Connect
the projector
and computer
with a suitable commercially
available
cable.
2. Press the 1NPUT button of the projector
or the RGB
1/2 button
of the remote
control
and select the input
where the computer
is to be connected.
3. Start the mouse function.
4. Refer to page 10, 26 concerning
the remote control of mouse operations.
5. Varying the force with which the DISK PAD button is pressed varies the speed of mouse operation.
USB jack
Projector
Computer
USB jack
(B type)
(A type)
2
1
+5V@
@+5V
-DATA@
@-DATA
+DATA@
@+DATA
3
4
GND@
@GND
USB cable
1
2
3
4
_Caution-)
• Before making connections,
read the instruction
manual
of the equipment
to be connected.
• Use the optional
USB cable to connect.
• Effective
with USB only when the mouse is used.
• Do not use with any device other than a personal
computer.
• When using with Windows
95, it is necessary
to set so that USB can be used with version
OSR 2.1 or higher. Depending
on the version
of the host controller,
operation
may not be
possible
in some cases.
• In the case of notebook
type computers
with a built-in pointing
device such as a track ball, in
some cases the built-in
pointing
device wilt have priority even if a mouse is connected
and
the mouse may not be selected.
In such case, disable the built-in
pointing
device and change the BIOS setting (system
setup)
so that an external mouse can be selected.
After changing
the B1OS setting, perform the operations
described
in 1 - 3 above.
Refer to the computer
hardware
manual concerning
the BIOS setting.
Also,
some computers
may not have a utility
program
to operate
a mouse.
Refer to the
computer
hardware
manual.
25
Advertisement
