-SET
UP-
FUNCTIONS
Press MENU,
1, and ENTER to display
3 of the -SET UP- Functions.
There are a total of 8 -SET UP- Functions.
Use the CURSOR UP or DOWN to scroll through the functions, or use the number buttons to highlight a function. The
functions highlighted in purple can be selected by pressing ENTER. To exit the on-screen display, press MENU or
RECALL.
_-_
-_U-
1 SETUP
12
_cTu_
CLOS_ CAPTION
NTIAL SETTING
CAPT_CN
r-_
8 - SEt' UP-
AUTCI,IATJC M ESSAGE
VCt._
C_RECT_
NOTE:The MULTI-PAGE SELECT SWITCH must be set to "TV" mode to use the number keypad. Selecting
a function may be easier by using the CURSOR UP and DOWN buttons with the MENU and ENTER
buttons.
To see an autodemonstration of the on-screen display, press and hold the POWER button on the TV
setfor approximately5 seconds. Press the POWER buttonon the TV again to endthe autodemonstration.
• CLOSED CAPTION [-_
When CLOSED CAPTION is _ighlighted in purple, press ENTER to see the following display:
- CLOSED CAPTN_N-
I (74SPLAY :ON
2 MOOE
: CAPTION
3 CHANFEL : I
P/_SS ENTI_ TO S4ET
Closed captions are the dialogue, narration, and/or sound effects of a television program or home video which are
displayed on the TV screen. Your local TV program guide denotes these programs as [_
DISPLAY: ON/OFF is to turn the r_
display on or off.
MODE: CAPTION is for the program you are viewing.
MODE: TEXT is for additional information such as news reports or a TV program guide. This information covers the
entire screen and viewing the TV program is not possible. TEXT may not be available with every ['_
program.
CHANNEL 1 is used for the primary language (usually English).
CHANNEL 2 is sometimes used for a second language (may vary by region).
Use the CURSOR UP or DOWN to highlight the function to change, press ENTER to change the function, and press
MENU to exit.
NOTE: The word MUTE will not be displayed if the DISPLAY is ON. If you do not have sound, make sure
MUTE is not set.
17