Table of Contents
Advertisement
• SOUND SEI-I'ING
Use the sound settings to improve the sound performance of your TV depending on listening conditions.
Press MENU, 3, ENTER, 2, ENTER to display the SOUND SETTING.
- K_NO SE1_INO -
1 MI"S MODE: S_
2 LOUDNESS:OFF
3 NT. SPEAKERS:OFF
14 SURRCUND: OFF
l PRESSENTER TO SET
Use the CURSOR A, • to select a function.
Press ENTER to set a function or to turn it on or off.
• MTS MODE (Multi-Channel
Television Sound) will allow you to select STEREO (a stereo broadcast), SA (second
audio) program which may be a secondary language, weather report, etc. or MONO (monaural sound) used when
receiving a weak stereo broadcast•
The sources received will be displayed below the channel number. The source you select will be displayed to the left
of the channel number. See example below for each selection when both stereo and second audio are received
(monaural is always received).
STEREO selected
SA selected
MONO selected
31
• LOUDNESS
This function wil! improve the quality of both low and high frequency sounds when listening at low volume levels.
• INT. SPEAKERS
This function is useful when you prefer to use only speakers from a separate stereo system.
• SURROUND
OFF:
Use this for normal
stereo/mono
broadcasts.
ON:
Listener
is surrounded
by many sound sources
such as a sporting
event, etc.
NOTE: Some TV systems do not transmit optimum audio channel separation which can reduce the
effectiveness of the SURROUND function.
29
Advertisement
Table of Contents
