Set-Up Functions - Hitachi 31DX11B Operating Manual

-SET UP- FUNCTIONS
Press MENU, 1, and EN11-R to display 3 of the -SE 1 UP- Functions. There are a total of 8 -SET UP- Functions.
Use the CURSOR UP or DOWN to scroll through the functions, or use the number buttons to highlight a function. The
functions highlighted in purple can be selected by pressing ENTER. To exit the on-screen display, press MENU or
RECALL.
i _ °MENU°
/ To ,,T
/
"_ -SETUP-
CI.OSl_ CAPTION
INITIAL SETTING
CHANNEL CAPTION
-SETUP-
6 AUTOMATICMESSAGE
7 CHILD LOCK
8 VOLUMECORRECTION
NOTE:The MULTI-PAGE SELECT SWITCH mustbe set to _" m_e't0-use'the n_mbef'l_eypad._electing ' :
a function may be easter by using the CURSOR UP and DOWN buttons with the MENU and ENTER
buttons.
To see an autodemonstration of the on-screen display, press and hold the POWER button onthe TV
set for approximately 5 seconds. Press the POWER button on the TV again to end the autodemonstration.
• CLOSED CAPTION [_
When CLOSED CAPTION is highlighted in purple, press ENTER to see the following display:
- CLOS_ CAPTION -
1 DISPLAY :ON
2 MODE : CAPTION
3 CHAkNEL : 1
PRESS ENTER TO SET
Closed captions are the dialogue, narration, and/or sound effects of a television program or home video which are
displayed on the TV screen. Your local TV program guide denotes these programs as r_
DISPLAY: ON/OFF is to turn the _ display on or off.
MODE: CAPTION is for the program you are viewing.
MODE: TEXT is for additional information such as news reports or a TV program guide. This information covers the
entire screen and viewing the TV program is not possible. TEXT may not be available with every [_ program.
CHANNEL 1 is used for the primary language (usually English).
CHANNEL 2 is sometimes used for a second language (may vary by region).
Use the CURSOR UP or DOWN to highlight the function to change, press ENTER to change the function, and press
MENU to exit.
displayed if theDISPLAY is ONI If
I MUTE is not set.
19