Hitachi 27CX6B Operating Manual page 23

HOW TO USE THE REMOTE TO CONTROL YOUR TV
MENU, ENTER, CURSOR Buttons
All the on-screen display features can be set or adjusted by using these buttons.
The "MENU" button will start or exit the on-screen display.
The "CURSOR" buttons will highlight functions or adjust different features.
The "ENTER" button will set features to your preference.
Q HANNEL SELECTOR Buttons
Enter two or three numbers to select channels. Enter a "0" first for channels 1 to 9.
For channels over 100, press 1 and wait for 2 seconds before pressing the last two digits of the channel.
Channel selection may also be performed by pressing channel ( _IL ) or down (V).
I NOTE: The TV may not receive some channels if you are not in the correct AIR/CABLE mode. See page 34.
®
AVX Button
The AVX (Auxiliary Video) button will select between the antenna signal and the video input jacks each time the
button is pressed. If the Picture-in-Picture (PinP) is on, the AVX will not select to any source signal. (See page 30.)
Model 27CX25B does not have PINP function.
ESPN STEREO 28
ST/SA
T
AVX
27CX5B, 27CX6B, 27CX25B
VIDEO
AVX
AVX
VIDEO
(S-IN)
I ESPN STEREO 28
ST/SA
T
20SA3B
AVX
AVX
VIDEO
23