Hitachi 27CX6B Operating Manual page 17

CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING STEREO VCR OR STEREO VIDEO DISC PLAYER
1.
2.
3.
Connect the cable from the VIDEO OUT of the VCR or the Video Disc Player to the "INPUT (VIDEO)" jack on the
TV set. (Fig. 1)
Connect the cable from the AUDIO OUT "R" of the VCR or the Video Disc Player to the "INPUT(AUDIO/R)" jack.
(Fig. 1)
Connect the cable from the AUDIO OUT "L" of the VCR or the Video Disc Player to the "INPUT(AUDIO/L)" jack.
(Fig. 1)
4. Press the AVX button to view the program from the VCR or Video Disc Player. The mode "VIDEO" disappears
automatically after approximately 8 seconds.
Video Cassette Recorder
5. Press the AVX button to return to the previous channel.
TVINPUT
TERMINAL
INPUT
VIDEO
(MONO_
0"
AUDIO !
i
__2
I
VIDEO OUT AUDIO OUT
R
FIG. 1
NOTE:
TV INPUT
TERMINAL
@®®®
S-VHS V L R
OUTPUT
BACK OF VCR
I
HITACHI MODEL VT-S751A
or similar model
Completely insert the connection cord plugs when connecting to REAR panel jacks. If you do not the
picture that is played back may be abnormal.
If you have an S-VHS VCR, use the S INPUT cable in place of the standard video cable.
17