Hook-Up Cables And Connectors; Antenna Connections To Rear Jack Panel - Hitachi 42V515 Operating Manual

Lcd rear projection tv
Hide thumbs Also See for 42V515:
Table of Contents

Advertisement

HOOK-UP CABLES AND CONNECTORS
Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors.
For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell
audio_'ideo products. Below are illustrationsand names of common connectors, Before purchasing any cables, be sure of the output
and input connector types required by the various components and the length of each cable.
N!IIIIJJI
ci;%; II!
ii!!iiiii}i il
m
H!i!kiiU.i
300-Ohm Twin Lead Connector
This outdoorantenna cable must be connected to an antenna
adapter (300-Ohm to 75-Ohm).
©
Phono Connector
Used on all standard video and audio cables which connect to
inputs and outputs located on the television's rear jack panel
and front control panel.
"F" "lype 75-Ohm Coaxial Antenna Connector
For connecting RF signals (antenna or cable "I'V)to the antenna
jack on the television.
S-Video (Super Video) Connector
This connector is used on camcorders, VCRs and laser- disc
players
with
an
S-Video
feature
in
place
of
the
standard video cable to produce a high quality picture.
D-SUB MINI 9-Pin Cable
This cable is used to connect to the RS232C input located on
the rear panel so you can control some of your TV functions
from an external home control system.
HDMI Cable
This cable is used to connect your extemal devices such as Set-
Top-Boxes or DVD players equipped with an HDMI output con-
nection to the TV's HDMI input.
ANTENNA CONNECTIONS TO REAR JACK PANEL
VHF (75-Ohm) antenna/CAW
(Cable l"V)
When usinga 75-Ohm coaxial cable system, connectCATV coaxial cable to the ANT
A (75-Ohm) terminal. If you have an antenna, connect the coaxial cable to _
ANT
B terminal.
VHF (300-Ohm) antenna/UHF antenna
When using a 300-Ohm twin lead from an outdoor antenna, connect the VHF or
UHF antenna leads to screws of the VHF or UHF adapter. Plug the adapter into
the antenna terminal on the TV.
When both VHF and UHF antennas are connected
Attach an optional antenna cable mixer to the TV antenna terminal, and connect
the cables to the antenna mixer. Consult your dealer or service store for the
antenna mixer.
To outdoor antenna
" Toantenna
To o_ool" VHF
c_ UHFante_t
t
ANTA/ANT B
Fr0m 0utd0or
From UHF_ten_
CAW System

Advertisement

Table of Contents
loading

Table of Contents