Hitachi DV-P313U Instruction Manual page 20

***OOO0**OO0,O**mO_HON,_*_O _ • * _•, [
@
@ @ 0 0 0
Rear Panel )
O DIGITAL AUDIO OUT JACK
• *Use either an optical or coaxial digital
cable to connect to a compatible
Dolby Digital receiver. Use to connect
to an A/V Amplifier that contains a
Dolby Digital decoder or DTS
decoder.
• MIXED AUDIO OUT JACKS
• ,Connect to the Audio input jacks of
your television, audio/video receiver.
Q VIDEO OUT JACK
• *Use a video cable to connect one of
the jack to the Video input on your
television.
20
g S-VIDEO OUT JACK
• *Use the S-Video cable to connect this
jack to the S-Video jack on your
television for a higher quality picture.
The S-Video must be selected in the
VIDEO OUT SELECT SWITCH.
• COMPONENT VIDEO OUT JACKS
• *Use these jacks if you have a TV with
Component Video in jacks. These
jacks provide Pr, Pb and Y video.
Along with S-Video, Component Video
provides the best picture quality. The Y,
Pb, Pr must be selected in the VIDEO
OUT SELECT SWITCH.
• VIDEO OUT SELECT SWITCH
• *Use the switch to set video out.
• .If the Y, Pb or Pr is selected, the S-
Video may not work.
• .If the S-Video is selected, the Y, Pb or
Pr may not work.
[