Amana ACE156E Owner's Manual page 20

WoB |nstoNotions: slide-out chassis only
Note: Remove the 2 shipping screws on the top of the air conditioner
that hdd the chassis to the outer shd[ casing. Once removed,
these do not have to be re-instdbd. To ensure that your air
conditioner is properly installed in the wall, it is recommended
that it be installed by a certified technician who is familiar with
through the wall installations.
1) Using wood, 1" or more in thickness, build a wooden frame to fit the
casing/cabinet dimensions of the unit which you have purchased.
2) Measure the outside width and the height of the frame to determine the
cutout dimensionsnecessaryfor the opening in the wall. The depth of the
frame wi[[ depend on the depth of the wall. The finished frame mustbe set
in the inside wall. The frame has to be squared and bvded. Rememberthe
frame has to be nailed securelyto the wail studs. (See Fig. # 19)
Fig. # 19
3) Now to install, insertthe casing into the wall opening. (Removethe
chassisout first following steps 1 - 6 in Slide-outchassissection).
Make sure that the cabinet is at least 1/2" inch inside the room. Also the
side louversshould not be blocked. This is to have proper air circulation in
and around the compressor.(SeeFig, # 20)
lg