Amana ACE156E Owner's Manual page 12

Fig. # 4
Control Panel.
m
iiiiiii
iiiiiii ¸
Timer on or Timer off mode is used to pre-start or shut off your unit in
advance. You can program this up to 24 hours in advance. You can use
the Timer in 4 functions i.e. COOL, Energy saver, Dehumid or Fan .
® Timer on (See Fig. # .5)
Unit must be on to set the timer. Unit will shut down automatically after it
accepts the settings in 5 seconds. Use this mode to pre-set the start time of
the unit 24 hours in advance.
a) Press TIMER ON, LED display will show "XX'' (time set last time) when power
is connected first time, LED display will show "01 ".
b) Set desired number of hours by pressing the (A) pad of the Temp/Time
buttons, one for each hour. If you passed the desired time use the (T) pad
key to lower the selection.
c) After set TIMER ON, LED display will show the time. This time displayed:
unit will starts after X hours.
Timer off (See Fig. # .5)
Unit must be running to set the timer off. Use this to preset the time you
would like the unit to shut off.
a) Press TIMER OFF, LED display will show II_J (time set last time) when power
is connected first time, LED display will show "01 ".
b) Set desired number by pressing the (A) pad of the TempMime buttons.
One for each hour. If you passed the desired time, use the (T) pad key to
lower the selection.
c) After set TIMER OFF, LED display will show the room temperature about .5 seconds
later.
When using the timer the unit will use/revert fo the last COOL and fan
seliings when activated. The timer must be reset every time you choose to
use it.
II