Amana ACE156E Owner's Manual page 19

iNSTALL SASH B_CKET
& SEAL GASKET
Install sash bracket on top of indoor window sash
with one wood screw 3 ]/32" to prevent raising of
window from the outside. Screw anchor d recfly into
side of window frame. For hard wood or metal window
frames, drill a pilot hole to start screw,
Imporlant:Be careful not to drill pilot hole too deep
Add a piece of tape to the drill bit as a depth gauge.
Also stay clear of glass. Be careful not to damage the
function of he window.
Cut window seal gasket to width of window Stuff window
seal strip be ween outdoor window glass and top of
indoor sash. This will stop air leakage which reduces
efficiency.
RETURN
CHASSISTO
OUTERCASE
Find someone to help you
replace chassis in outer case.
Replace front panel, and grille.
Cautlon:
For security purpose, reinstall
screws at cabinet's sides.
Where possible insqall lwo screws
on op of the outer case, removed
in slep one
IMPORTANT: Because window
sash helps keep unit in window,
make certain window sash contacts
outer case before reinstalling
chassis.
18