Table of Contents
Advertisement
Press
to auto-detect IDE and SATA channels in the system. Once the
Enter
channel is detected, the values for Capacity, Cylinder, Heads, Precomp, Landing
Zone, and Sector are automatically filled in.
None
There is no HDD installed or set.
Auto
The system can auto-detect the hard disk when booting up.
Manual
When you set the channel to
you can then enter the number of cylinders, heads, Precomp, landing zone,
and sector. You can manually enter the values or you can press
display a window that tells you the min and max values.
IDE HDD Auto-Detect
IDE Channel 0 Slave
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
The BIOS supports the following HDD
Access Modes:
CHS
For HDD less than 528 MB.
LBA
For HDD greater than 528 MB and
supporting LBA (Logical Block
Addressing).
Large
For HDD greater than 528 MB but not supporting LBA.
Auto
Recommended mode.
and change
[Manual]
Access Mode
[Press Enter]
[Manual}
[CHS]
0 MB
Press ENTER to display sub-menu
or enter number manually
.....0
[
0]
[
0]
Cylinder
[
0]
[
0]
Min=
0
Max=65535
Key in a DEC number :
:Move
Configuring the BIOS
to
,
[CHS]
to
Enter
ENTER:Accept
ESC:Abort
35
Advertisement
Table of Contents
