EVGA nForce 122-CK-NF68-XX User Manual page 161

Installing and Configuring the EVGA nForce 680i SLI Motherboard
Enable NVIDIA SLI
At this point, you need to enable NVIDIA SLI. You can do this either by
clicking on the SLI capable system
Control Panel.
To launch the NVIDIA Control Panel, select
Corporation NVIDIA Control Panel.
Select
Set SLI configuration
Click
Enable SLI technology (recommended)
110
balloon or by going to the NVIDIA
Start All Programs
Click on the 3D Settings
from under .
Performance
and click
NVIDIA
icon .
Apply.