Installing The Motherboard; Installing The I/O Shield; Securing The Motherboard Into The Chassis - EVGA nForce 122-CK-NF68-XX User Manual

Evga mainboard user guide

Table of Contents

Installing and Configuring the EVGA nForce 680i SLI Motherboard

Installing the Motherboard

The sequence of installing the motherboard into the chassis depends on the

chassis you are using and if you are replacing an existing motherboard or

working with an empty chassis. Determine if it would be easier to make all the

connections prior to this step or to secure the motherboard and then make all

the connections.

Use the following procedure to install the I/O shield and secure the

motherboard into the chassis.

Note:

Be sure that the CPU fan assembly has enough clearance for the chassis

covers to lock into place and for the expansion cards. Also make sure the

CPU Fan assembly is aligned with the vents on the covers.

The motherboard kit comes with an I/O shield that

is used to block radio frequency transmissions,

protects internal components from dust and foreign objects, and promotes

correct airflow within the chassis.

Before installing the motherboard, install the I/O shield from the inside of the

chassis. Press the I/O shield into place and make sure it fits securely. If the

I/O shield does not fit into the chassis, you would need to obtain the proper

size from the chassis supplier.

Most computer chassis have a base with mounting studs or spacers to allow the

motherboard to be secured to the chassis and help to prevent short circuits. If

there are studs that do not align with a mounting hole on the motherboard, it is

recommended that you remove that stud to prevent the possibility of a short

circuit.

1. Carefully place the motherboard onto the studs/spacers located inside the

chassis.

2. Align the mounting holes with the studs/spacers.

3. Align the connectors to the I/O shield.

Table of Contents