Assembly - GENTRON GG10000 Owner's Manual

Manual
Assembly
Unpacking
1. Remove the generator and loose parts box from the carton.
2. Compare the loose parts with the inventory list below.
LooseParts
(Wheel kit and handle)
Check all loose parts against the following list. Contact your dealer toll free at 888.896.6881
if any of the loose parts shown are not included with your generator
Hardware Check:
Your Hardware Kit should include:
1) 2 Handles with bolts and brackets
2) 4 (six) IVISx4Omm bolts, (6mm x 1.0) thread
3) 4 (six) IVI8 Nuts (6mm x 1.0) thread
4) 2 (two) rubber bushings with 2 nuts
5) 2 (two) axle shafts and axle mount brackets
6) 2 (two) washers
7) 4 (four) cotter pins
8) 8 (eight) bolts and nuts for the leg and the axle mount brackets
9) 1 (one) generator leg
10) 2 (two) wheels (not shown)
5
@@@@
1
@@@ @@@@ @