Operating Instructions - GE AGW10 Owner's Manual And Installation Instructions

About the
controlson
theair
conditioner.
Features and appearance may vary.
Fan on
(;eel o n
COOL
FAN
Timer on
TEMPERATURE
Air ConditionerControls
-0 0-
RemoteControl
Controls
O ON/OFFPad
TtlFns air conditioner on and off.
O Increase •/Decrease • Pads
Use to set telnperature when in COOL mode,
O ODE
Use to set the
air conditioner to
COOL
or
FANinode.
O FANPad
Use to set the tim speed to LOW(F1),
MED (F2) or HIGH(F3).
0
0
TIMER Pad
ON--When the air conditioner is off,
it can be set to automatically COlile on in
1 to 12 hom_ at its previous setting. Each
touch will set the timer in hom_.
OFf--_4]_en the air conditioner is on,
it can be set to automatically turn off in
1 to ] 2 hems, Each touch will set the timer
in hems.
To cancel the timer, press the T/MER pad
tmtil the display time disappears.
Remote Control Signal Receiver
Oisolav
Shows the set temperature or time remaining
on {iII/eI;
Power Outage Recovery Feature
In the case el a power outage or interruption, the
trait will automatically re-start in the settings last
used after the power is restored, If the TIMER
teatm'e was set, it will resmne its cotmtdown.
Y_)u ma_ need to set a new time if desired,
Remote Control
::Ji:: To ensm'e proper operation, aim the remote
control at the signal receiver on the air
conditione_;
iJi:: T he remote control signal has a range of
up to 21 teet,
::Ji:: M ake
sm'e nothing
is between the air conditioner
and the remote control that could block the
signal,
::Ji:: M ake stlre batteries are fl'esh and installed
correctly as indicated on the remote control,
4