Installation
Instructions
INSTALLING THE REFRIGERATOR
(cont.)
171REMOVE THE FREEZER DOOR (cont.)
r_
use the tip of a screwdriver to separate the rail from
the rail cover.Tilt the front end up and lift the entire door.
F_ Set the door front on a nonscratching surface.
['_
Pushthe rail assemblies back into the cabinet.
-& CAUTION:
P ushboth sides of the rail
assemblies back at the same time.
[]
REMOVING THE LEVELING LEGS
(if applicable)
26-cu.-ft. models
Removethe 2 bolts securing the levelingleg bracket to
the front of the refrigerator cabinet. Dothis on both
sides.
REMOVING THE LEVELING LEGS
(if applicable) (cont.)
29-cu.-ft. models
Two people are required to complete this procedure.
Gentlg lean the refrigerator back so the front end is off
of the floor.
Removethe 2 bolts securing the leveling leg bracket to
the underside of the refrigerator cabinet. Do this on both
sides.
REPLACING THE LEVELING LEGS
(if applicable)
26-cu.-ft. models
Replacethe 2 bolts to secure the leveling leg bracket to
the front of the refrigerator cabinet. Dothis on both
sides.
!
!
3O