GE PFSS6SMXESS Owner's Manual And Installation Instructions page 12

About the control with temperaturesettings for non-LeDmodels.
Model 26
f
TURBO FREEZE TURBO COOL
(Hold 3 sec (Hold 3 sec
for Turbo Fre_e) for Turbo Cool(
(Hold 3 sec (Hold 3 sec
to Reset Filter} to Lock Control)
Model 29
Energy
Saver
Adjust
Freezer
(Ho}d 3 seconds
for Turbo Freeze}
Ice &
Woter
IHo}d 3 sec
to Reset Filted
A(orml
Turbo Freeze Turbo Cool Light
Light ON/OFF
{Hold 3 seconds}
Adjust
Reffigerotor
(Hold 3 seconds
for Turbo Cool)
(ce Off/
Lock
Reset Filter Cubed Crushed Water
(Notd 3 sec
toLock controk}
NOTE:Therefrigerator is shipped with protective film covering the temperature controls. If this film was
not removed during installation, remove it now.
The temperature controls are preset in the foctorg at38°Ffor the refrigerator compartment and -2°F for
the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.
The temperature controls can displag both the SETtemperature as well as the actual temperature in the
refrigerator and freezer.Theactual temperature mog vorg slightlg from the SETtemperature based on usage
and operating environment.
ADJUST
REFRIGERATOR
{Hold 3 sec
for Turbo Cool)
ADJUST
FREEZER
{Hold 3 sec
for Turbo Freeze)
Changing the Temperature
Tochange the temperature, press and
releasethe ADJUSTFREEZER or ADJUST
REFRIGERATOR pod. The displog will
show the actual temperature. To change
the temperature, top either the ADJUST
FREEZER or ADJUSTREFRIGERATOR pod
until the desired temperature is displayed.
Once the desiredtemperature has been
set, the temperature displog will return
to the actual refrigerator and freezer
temperatures offer 10 seconds. Several
adjustments mog be required.
Eachtime gou adjust controls, allow
24 hours for the refrigerator to reach
the temperature gou hove set.
12