Pci Configuration Error Messages - Intel VS440FX Technical Specification

Table of Contents

Advertisement

VS440FX Motherboard Technical Product Specification

4.2 PCI Configuration Error Messages

The following PCI messages are displayed as a group with bus, device, and function information.
Message
Bad PnP Serial ID Checksum
Floppy Disk Controller Resource
Conflict
NVRAM Checksum Error, NVRAM
Cleared
NVRAM Cleared By Jumper
NVRAM Data Invalid, NVRAM Cleared
Parallel Port Resource Conflict
PCI Error Log is Full
PCI I/O Port Conflict
PCI IRQ Conflict
PCI Memory Conflict
Primary Boot Device Not Found
Primary IDE Controller Resource
Conflict
Primary Input Device Not Found
Secondary IDE Controller Resource
Conflict
Serial Port 1 Resource Conflict
Serial Port 2 Resource Conflict
Static Device Resource Conflict
System Board Device Resource
Conflict
68
Explanation
The Serial ID checksum of a Plug and Play card is invalid.
The floppy disk controller has requested a resource that is already in
use.
The Extended System Configuration Data (ESCD) was reinitialized
because of an NVRAM checksum error. Try rerunning the ICU.
The Clear CMOS jumper has been moved to the Clear position and
CMOS RAM has been cleared.
Invalid entry in the ESCD.
The parallel port requested a resource that is already in use.
More than 15 PCI conflict errors have been detected and no additional
PCI errors can be logged.
Two devices requested the same I/O address, resulting in a conflict.
Two devices requested the same IRQ, resulting in a conflict.
Two devices requested the same memory resource, resulting in a
conflict.
The designated primary boot device (hard disk drive, diskette drive, or
CD-ROM drive) could not be found.
The primary IDE controller has requested a resource that is already in
use.
The designated primary input device (keyboard, mouse, or other device
if input is redirected) could not be found.
The secondary IDE controller has requested a resource that is already in
use.
Serial Port 1 has requested a resource that is already in use.
Serial Port 2 has requested a resource that is already in use.
A non Plug and Play ISA card has requested a resource that is already
in use.
A non Plug and Play ISA card has requested a resource that is already
in use.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents