Adjusting The Height Of The Feed Dogs - Brother VX1140 Instructions Manual

11._JUSTING THE HEIGHT OF THE FEED DOGS
STANDARD
£
When he reed dogs are raised o heir hEghes po_J ion, hey should be belween (3.9 and 1 I mm higher than the needle plate.
ADJUSTMENT
• Turn the baFance wheel to raise the needle bar to ils highest position.
2. Loosen the screw.
3. Move the vertical feed arm to [he lel:t or tight to adjust the heiBht of lhe teed dogs.
4• Tighten the screw.
I
M Iq FI M_ o9-1,1mm
®'
l
-11 -