10. ADJUSTING
THE TENSION
OF TH]_ TL_ING
BELT
STANDARD
Fhere should be between 4,0 and 6,0 mm of slack in the th'n[ng belt when the cenler of the belt is pushed with appro×imate]y
200 g of
pressure
ADJUSMENT
I.
Loosen
the
b_o screws on the _TIotor
holder,
2.
Movethemotorhofdertoadjustthebefttension_oitmeetstheabovestandard.
3,
Tighten the b4,o screws,
_10-