Table of Contents
Advertisement
IDE Bus Master
This option enables or disables the IDE bus mastering capability under the DOS
environment.
Onboard IDE-1 Controller
This item enables or disables the onboard IDE-1 controller.
Onboard IDE-2 Controller
This item enables or disables the onboard IDE-2 controller.
OnChip Serial ATA Mode
This item allows you to select the mode for the On-Chip Serial ATA controller.
Options: IDE / RAID
OnChip Serial ATA
This item determines the function for on-chip Serial ATA.
[Disabled]: Disable the Serial ATA controller.
[Auto]: Allows the Serial ATA controller to be arranged by BIOS automatically.
[Combined Mode]: Parallel ATA and Serial ATA are combined together.
Supports up to 4 IDE drives.
[Enhanced Mode]: Enable both Parallel ATA and Serial ATA. Supports up to 6
IDE drives.
- Serial ATA 1 Mode / Serial ATA 2 Mode:
This item determines the function mode for SATA1 and SATA 2 Port. Both
SATA1 and SATA2 will be served each as one single IDE connector after
selected as the following modes:
Mode
Serial ATA
Port1
(SATA1)
Enhanced
IDE-3 Master
IDE-4 Master
Combined
IDE-1 Master
IDE-1 Slave
Serial ATA
Description
Port2
(SATA2)
IDE-4 Master
SATA1 serves as IDE-3 Master
SATA2 serves as IDE-4 Master
OnChip IDE-1 and IDE-2 controller enabled
IDE-3 Master
SATA1 serves as IDE-4 Master
SATA2 serves as IDE-3 Master
OnChip IDE-1 and IDE-2 controller enabled
IDE-1 Slave
SATA1 serves as IDE-1 Master
SATA2 serves as IDE-1 Slave
OnChip IDE-1 controller disabled
IDE-1 Master
SATA1 serves as IDE-1 Slave
SATA2 serves as IDE-1 Master
OnChip IDE-1 controller disabled
50
http://www.tyan.com
Advertisement
Table of Contents
