Filter Reminder; Energy Savings Mode; Default Factory Settings - Trane Comfort Control XB200 Manual

Filter Reminder

"FILTER" will automatically flash to remind the homeowner that its time to change the
filter once the preset time has expired. Pressing the "FILTER" keypad button automatically
resets the internal clock timer. Once the timer has been reset, the number of days remaining
till the next filter change can easily be determined by simply pressing the "FILTER" keypad
button. Pressing and holding the "FILTER" keypad button provides quick access to the
filter timer setup.
Energy Savings
The Energy Savings mode provides instant energy savings by offsetting the indoor setpoint
to a cooler temperature setting for heating and a warmer temperature setting for cooling. The
Energy Savings mode is activated by pressing the Energy Savings key "$" on the control
keypad. Pressing the Energy Savings key "$" again deactivates the Energy Savings mode.
Pressing and holding the Energy Savings key "$" provides quick access to the offset degree
setup for the current operating mode.

Default Factory Settings

The control is shipped with a set of factory default settings. The factory default settings can
Page - 13
be restored at any time using the control configuration menu. Please see Page 15 for a com-
Pub. No. 22-5204-01
plete listing of factory shipped default settings.