Filter Reminder; Energy Savings; Default Factory Settings - Trane XR401 Comfort Control Owner's Manual

Filter Reminder

Features
(cont-)

Energy Savings

Default Factory Settings

Page - 14
Pub. No. 22-5206-05
$
NOTE:
Press the Mode keypad button while viewing this screen to access the Cooling or Heat-
ing offset degrees setting, then use the UP or DOWN arrow key to select the desired
number of offset degrees.
- Press the Energy Savings keypad button again to return to normal display or just wait a
few seconds and the display will return on its own.
Page - 11
Pub. No. 22-5206-05
"FILTER/OD" will automatically flash to remind the homeowner that its time to change the
filter once the preset time has expired. Pressing the "FILTER/OD" keypad button automati-
cally resets the internal clock timer. Once the timer has been reset, the number of days
remaining till the next filter change can easily be determined by simply pressing the "FIL-
TER/OD" keypad button. Pressing and holding the "FILTER/OD" keypad button provides
quick access to the filter timer setup.
The Energy Savings mode can provide energy savings by offsetting the indoor setpoint to a
cooler temperature setting for heating and a warmer temperature setting for cooling. The
Energy Savings mode is activated by pressing the Energy Savings key "$" on the control
keypad. Pressing the Energy Savings key "$" again deactivates the Energy Savings mode.
Pressing and holding the Energy Savings key "$" provides quick access to the offset degree
setup for the current operating mode.
The control is shipped with a set of factory default settings. The factory default settings can
be restored at any time using the control configuration menu. Please see Page 17 for a com-
plete listing of factory shipped default settings.
Energy Savings offset degrees are selected separately for heating and cooling.
- Press and hold the Energy Savings keypad button to
gain Quick Access to the Energy Savings setup screen.
- Use the UP or DOWN arrow keys to change the
offset degrees setting.