GE GSS23WGTMCC Owner's Manual And Installation page 11

ge.com
Door Alignment
If doors are uneven, adjust the
refligerator dooL
O Using a 7/16" socket wrench, turn
the door adjusting screw to the right
to _vdsethe door; to die left, to lower
it. (A nylon plug, imbedded in file
threads of the pin, prevents the pin
flom turning unless a wrench is
used.)
O
AfYer one or two turns of the
wrench, open and close the
reflige_v_tor door and check the
aligmment at the top of the doo_s.
Screw down theSUppOrl
leguntilit touches the
floor. T his will prevent
door m isalignment.
Support Leg
Before moving file reflige_vlmr, you will
need m screw up the support leg. Once
the unit is relocated, you will need m
screw down the support leg again.
About the crispers andpans.
Not all features are on all models.
j
iii
Fruit and Vegetable Crispers
Excess water that may accumulate in the
bottom of the drawe_s should be wiped dry;
Z_;I I II II _ II II I 1_21(, .....
Adjustable Humidity Crispers
Slide the control all the way to the
Nlsetting to provide high humidit),
recommended for illost vegetables.
Slide the control all the way to the
LOsetting to provide lower humidity
levels recommended for
most
fluits.
11