Advertisement
Available languages
Available languages
About crisper removal
Not all features are on all models.
Crisper Removal
Crispers
can easily be removed
by pulling
tile drawer
straight
out and lifting tile
drawer
up and over tile stop location.
If die door prevents you flom taking out
the drawers, first ny m remove the door
bins. If this does not offer enough
clearance, the refligerator
will need m
be rolled forward until the door opens
enough m slide the dmweI_ out. In some
cases, when you roll the refligeramr
out,
you will need to move the refligemmr
m the left or right as you roll it out.
About the automaticicemaker.
A newly-installed
refrigerator may take 12 to 24 hours to begin making ice.
Automatic lcemaker
Icemaker
Power
lerArm
Switch
The icemaker will produce seven cubes
per cycle--approximamly
100-130 cubes
in a 24-hour period, depending
on fleezer
compartment
temperature,
room
mmperamre,
number of door openings
and other use conditions.
If tile refligerator
is operated
before
tile
water connection
is made to the icemake_,
set the power switch in the OFFposifion.
_qlen
the reflJgerator
has been connected
to the water supply, set the power switch to
the O/I/position.
The icemaker will fill wifll water when it
cools to 15°F (-10°C). A newly4nsmlled
refrigerator may rake 12 to 24 horns to
begin making ice cubes.
Pull the upper freezer shelf straight
out to access the icemaker. Always
be sure to replace the shelf. The
sheff can be used for storage.
Throw away tile first few batches of ice
to allow the water line to cleaL
Be sure noddng
interferes wkh tile sweep
of the feeler arm.
X_qlen the bin fills to file level of die feeler
am1, the icemaker
Mll stop producing
ice.
It is normM
for seve_M cubes to be joined
mgetheL
If ice is not used flequendy,
old ice cubes
will become
cloudy, taste stole and shrink.
Ice Storage Drawer
Toaccess ice, pull the drawer
forward.
Toremove the drawer, pull it straight
out and
lift it past the stop location.
12
Advertisement
