Installation Instructions - GE AZ75H12EACM1 Owner's Manual And Installation Instructions

Installation
Instructions
Zoneline Air
Conditioners
I ouestions?Visit our Website at: ge.com or call 800.GE.CARES (800.432.2737).
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IMPORTANT - S.,ethese
instructions fin" local inspector's use.
• IMPORTANT - Obse,,e .ll
governing codes and ordinances.
• Note to Installer
-
Be sure
to
leave these
instructions with the owner.
• Note to Owner - Kee I) these instructions tot
fl]ture reference.
• Proper installation is the responsibility of the
installer.
" Product tailure due to improper installation is not
covered under the X_hrrantv.
TOOLS YOU WILL NEED
Phillips screwdriver
Saw
Adjustable wrench
Hammer
Tape measure
IMPORTANT ELECTRICAL
SAFETY-READ CAREFULLY
CAUTION:
• All electrical cmmections and wiring MUST be
installed by a qualified electrician.
• Follow the National Electrical Code (NEC) and/or
local codes and ordinances.
• For personal safety, this Zoneline unit and case
must be properly grounded.
• Protective devices (fuses or circuit breakers)
acceptable for Zoneline installations axe specified
on the nameplate of each unit.
• Do not use ml extension cord with this unit.
• Aluminum building wiring may present special
problems--consult a qualified electrician.
• When the unit is not running there is still voltage to
the electrical controls.
Discmmect the power to the unit before
servicing by:
1. Removing the power cord (if it has one) from
the wall receptacle.
OR
2. Removing the brmlch circuit fuses or turning
the circuit breakers off at the pmlel.
I
^AUk WARNING: Bef,,,e be_im, i.,_ the
installation, switch power off at the service panel
and lock the area to prevent power from being
switched on accidentally. When the area cannot
be locked, secm'elv tasten a prominent warning
device, such as a tag, to the selwice panel.
10