Advertisement
The
Problem
SoDer
Questions
?
Use this
problem
soIver.P
PROBLEM
DARK STREAKS
OR SPECKS ON
HALOGEN/RADIANT
COMPONENT
AREAS OF
DISCOLORATION
ON HALOGEN/
RADIANT
SURFACE
COOKTOP
FREQUENT
CYCLING
OFF AND ON OF
HALOGEN/RADIANT
SURFACE
UNITS
HOT SUGAR
MIXTURES/PLASTIC
MELTED TO THE
HALOGEN/RADIANT
SURFACE
CONTROL
KNOB
WILL NOT TURN
SPARKING
SOUND
PERSISTS
AFTER
BURNER
LIGHTS
POSSIBLE
CAUSE
Use
_ l"2_zof
S(l_pel
_lr_(] le(
ol_?i_?ended
cle2H_in_
plocedllle,
Marks from ahm_inum
and coppe5 pans as _ell as mineral
deposits
from waler 5)5food can be removed wifi_ Cooktop
Cleaning
Cream.
ln(orrec_ cook_sare used. Use onl} fla_ cook_sare _o minimize
c}cling.
Turn the surf)_ce unit to LO, wipe the hot ( ooktop with several dry
paper _owels. Use a razor scraper held at a 30 ° angle _o _he cook_op
to scrape the hot spill to a cool area outside the surL_ce unit. Let the
cooktop f:ool. Clean with Cooktop
Cleaning
Cream.
When fi_e knob is a_ fl_e off (()) position,
i_ mus_ be pushed
in before
it can be turned.When
the knob is at an? other position,
i_ can be
turned _dfi_om being pushed in.
Sparking of the igniter is normal. Air (urrems
in the ki_( hen tiom
an open window or a person moving quickly can imerrup_
_he flame,
causing automatic
religh_ sparking.
As fi_e bin:net warms, the
sparking is less likely to occm:. If the sparking
persists fi_r a long time,
(:all for service.
SPARKING
SOUND
Be sure the control knobs are in the off (O) position.
If the sparking
PERSISTS AFTER
sound persists (:all tier service.
BURNER
IS OFF
BURNERS
DO
NOT LIGHT
Make sure electrical plug is plugged into a li_e po_ er outlet.
(;as supply no_ connected
or not turned on.
Orifice in burner body may be clogged
(see fl_e (;as Burner
Component
section). Remove the obstruction.
Bmner parts no_ replaced
correctly (see _he (;as Burner Componen_
Counter unit not properl)
grom-sded 555polarized.
This can aErect
Soil clogging hods in burner
cap. Remove and clean.
Cooktop burner
15)13 not repl;-_ced correctl?.
30
Advertisement
