STEP 4A - MOUNTING TO A WALL WITH WOOD STUDS
The mount can be attached to walls with wood studs. The wall
covering (drywall, lath, plaster, etc.) may not be thicker than 1/2".
1. Use the electronic stud finder to locate a stud in the wall. Use the
pencil to mark the areas of the wall where the studs are located.
2. Hold the template against the wall, using the pencil marks as a
guide. Ensure 2 holes in the template line up with the studs.
Use the level to level the template.
When the template is level, tape it in place.
2
Ensure 2 holes in
template line up
with studs
1
1
2
Level
7