9. Remove 2 plastic anchors from the pouch labeled ANCHOR.
Push the 2 plastic anchors into the small holes as shown.
Remove a metal anchor from the pouch labeled ANCHOR.
Push the metal anchor into the large hole as shown.
Ensure all anchors are inserted completely and are flush with the
wall. Lower the mount back into place.
10. Remove the 2 small screws and 2 small washers from the
pouch labeled LAG.
Using a screwdriver, insert the 2 small screws and 2 small
washers into the small holes on the mount. The small screws
should be inserted completely into the plastic anchors.
9
10
17