Download Print this page

Ariens 915131-Zoom 34 Owner's Manual page 4

Zoom series

Advertisement

[,.'_-,1 _ 1 =11"4
WARNING: This cutting machine
is capable of amputating
hands
and feet and throwing objects.
Failure to observe the safety
instructions in the manuals and on
decals could result in serious
injury or death.
Slopes are a major factor related
to loss-of-control
and tip-over
accidents. Operation on all slopes
requires extra caution.
Tragic accidents can occur if the
operator is not alert to the
presence of children. Never
assume that children will remain
where you last saw them.
Gasoline is extremely flammable
and the vapors are explosive,
handle with care.
Disengage attachment,
stop unit
and engine, remove key, engage
parking brake, and allow moving
parts to stop before leaving
operator's position.
SAFETY ALERTS
A
Look for these symbols to point
out important safety
precautions. They mean:
Attention!
Personal Safety Is
Involved!
Become Alert!
Obey The Message!
The safety alert symbol is used in decals and
with this manual. Understand
the safety
message. It contains important information
about personal safety.
A
WARNING:
POTENTIALLY
HAZARDOUS
SITUATION!
If not
avoided, COULD RESULT in
death or serious injury.
A
DANGER:
IMMINENTLY
HAZARDOUS
SITUATION!
If not
avoided, WILL RESULT in death
or serious injury.
CAUTION:
POTENTIALLY
HAZARDOUS
SITUATION!
If not
avoided, MAY RESULT in minor
or moderate injury. It may also be
used to alert against unsafe
practices.
NOTATIONS
NOTE:
General reference information
for
proper operation and maintenance
practices.
IMPORTANT:
Specific procedures or
information
required to prevent damage to
unit or attachment.
SAFETY DECALS AND
LOCATIONS
ALWAYS replace missing or damaged Safety
Decals. Refer to figure 2 for Safety Decal
locations.
GB-4

Advertisement

loading