Amana Dryer User Instructions page 3

Table of Contents

Advertisement

Available languages

Available languages

WARNING:
For your safety, the information
in this manual
must be followed
to minimize
the risk of fire or explosion,
or to prevent property
damage,
personal
injury, or death.
- Do not store
or use gasoline
or other flammable
vapors and liquids in the vicinity of this
or any other appliance.
- WHAT TO DO iF YOU SMELL
GAS:
= Do not try to light any appliance.
= Do not touch
any electrical
switch;
do not use any phone in your building.
= Clear the room, building,
or area of all occupants.
= Immediately
call your gas supplier from a neighbor's
phone. Follow the gas supplier's
instructions.
• If you cannot
reach your
gas supplier,
call the fire department.
- Installation
and service
must be performed
by a qualified
installer,
service
agency,
or
the gas supplier.
WARNING: Gas leaks cannot always be detected
by smell.
Gas suppliers
recommend
that you use a gas detector approved
by UL or CSA.
For more information,
contact your gas supplier.
If a gas leak is detected,
follow the "What to do if you smell gas" instructions.
Along with heat, dryers require good air flow to efficiently dry
laundry. Proper venting will reduce your drying times and improve
your energy savings.
See Installation Instructions.
The venting system attached to the dryer plays a big role in good
air flow.
[]
Replace plastic or foil vent material with 4" (102 mm)
diameter heavy, rigid vent material.
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow
these instructions can result in death
or fire.
Service calls caused by improper venting are not covered by the
warranty and will be paid by the customer, regardless of who
installed the dryer.
Maintain
Good
Air flow
by:
[]
Cleaning your lint screen before each load.
[]
Use the shortest length of vent possible.
[]
Use no more than four 90 ° elbows in a vent system; each
bend and curve reduces air flow.
[]
[]
Good
Better
Remove lint and debris from the exhaust hood.
Remove lint from the entire length of the vent system at least
every 2 years. When cleaning is complete, be sure to follow
the installation instructions
supplied with your dryer for final
product check.
[]
Clear away items from the front the dryer.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents