Agri-Fab 45-0313 Owner's Manual page 4

ASSEMBLYINSTRUCTIONS
1. Assemble vinyl caps onto the ends of the R.H. and
L.H. Hitch Tubes. See figure 1.
2. Assemble the R.H. Hitch Tube to the spreader
frame tube using two 1/4" x 2-1/4" hex bolts and
1/4" hex nuts. Do not tighten yet. Repeat for L.H.
Hitch Tube. See figure 1.
4. Assemble the Hitch Brackets to the Hitch Control
Tube using two 1/4" x 1-314" hex bolts and 1/4"
hex nuts. Tighten. See figure 3.
5. Assemble the hitch pin through the hitch brackets
and secure with the 1/8" hair cotter pin. See figure 3.
HEX BOLT
FIGURE 1
HITCH PIN
114"x 1-3/4"
HEX BOLT
1/4" HEX Nt, r r _ : ;
HAIR COTTER PIN -.--_,4 _
3. Assemble the Hitch Control Tube between the
Hitch Tubes using two 1/4" x 1-3/4" hex bolts and
1/4" hex nuts. Tighten all bolts and nuts . See
figure 2.
1/4" HEX NUT
1/4" x 1_1/4"
HEX BOLT
FIGURE 2
FIGURE 3
6. Assemble the vinyl cap onto the Hitch Control
Tube. See figure 4.
7. Assemble the Control Cable to the Hitch Control
Tube using the 1/4" x 2-114" carriage bolt and
nylon wing nut. See figure 4.
NYLON
CARRIAGE BOLT
FIGURE 4
4