Effect Types And Parameters; Comp (Compressor) Module - Zoom Player 3000B Operation Manual

Effect Types and Parameters

This section explains all of the Zoom Player 3000B's effect types and parameters. However, parameters
that are the same for several effect types are only explained fully the first time they appear.
• Parameters marked with "G" are global parameters, and parameters marked with "P"
are patch parameters. These parameters can be changed regardless of the on/off
condition of the respective effect module.
• Parameters marked with "
when that effect module is selected.
• Shaded sections (
When such a parameter is selected, the display only shows "

COMP (Compressor) Module

This module contains effects that influence the dynamic range, such as a compressor and limiter. The Volume
RTM setting is also made in this module.
TYPE
1. COMP
COMP
Sens
Parameter 1
1–50
Parameter 2
Peak(Wild)
Parameter 3
1–8
Parameter 4
Parameter 5
Parameter 6
Effect types
The following six effect types are available in the
COMP module.
Type 1 COMP (Compressor)
Type 2 COMP2 (Compressor 2)
Type 3 LIMITER
Type 4 DUAL COMP (Dual Compressor)
Type 5 DEFRET
Type 6 SLAP
Depending on the selected effect type, the content of
parameters 1, 2, 3, 4 changes.
Type 1 COMP (Compressor)
The compressor maintains the volume within a given
dynamic range by reducing attack intensity.
Parameter 1 Sens
Determines the compressor depth.
Parameter 2 Atk
40
RTM
" are parameters which can be operated by RTM
)indicate that there are no setting items for the parameter.
2. COMP2 3. LIMITER
Sens(Threshold)
1–50
Atk
1–50
Peak(Release) Peak(Ratio)
1–8 1–8
Tone
1–8
VOLUME RTM (P)
. . . ".
4. DUAL COMP 5. DEFRET
Sens1
1–50
Sens2
1–50
X-F
1–8
Bal
0–100
Level
1–30
oF, on
Determines the time interval between the bass guitar
sound and the onset of the compressor effect.
Parameter 3 Peak (Wild)
Higher values result in a more peak-oriented,
unrestrained sound.
Parameter 4 Tone
Higher values result in a brighter sound.
Type 2 COMP2 (Compressor 2)
Compared to COMP, this effect type causes a less
intense sound change.
Parameter 3 Peak (Release)
Determines the speed of compression release.
The parameter content is the same as for Type 1
(COMP).
Type 3 LIMITER
This effect keeps the sound below a certain level.
Parameter 1 Sens (Threshold)
Determines the threshold from which the limiter
ADVANCED BASS EFFECTS PROCESSOR
6. SLAP
Sens
1–50
Atk
1–50