Zoom B2.1u Operation Manual page 9

Directly selecting a bank
To select the banks A – d, 0 – 3 directly, use the BANK [-]/[+] keys.
Pressing the BANK [-] key calls up the next lower bank, and pressing the BANK
[+] key calls up the next higher bank.
ZOOM B2.1u
Adjust tone and volume
To adjust the effect sound and volume levels in
play mode, the Parameter knobs 1 – 3 can be
used. Each knob controls a specific parameter.
Parameter knob 1
Adjusts the CABINET
parameter of the
DRIVE/SYNTH module
(cabinet simulator
effect intensity).
Parameter knob 2
Adjusts the TONE parameter of the DRIVE/SYNTH
module (mainly distortion sound character).
When you turn a Parameter knob, the corresponding
LED lights up and the display briefly shows the
current value of the respective parameter.
NOTE
• If the DRIVE/SYNTH module is set to OFF
• The higher the setting value of Parameter
• Changes made here are temporary and
• The master level in common to all
Parameter knob 3
Adjusts the PATCH
LEVEL parameter (output
level of the entire patch).
for the currently selected module
(indication "oF" is shown on the display),
Parameter knobs 1 and 2 have no effect.
knob 1 (CABINET parameter), the more
will the cabinet character be
emphasized.
will be lost when you select another
patch. To retain the changes, store the
patch in the user area.
patches is set in edit mode (→ p. 34).
Selecting a Patch
9