Audio Interface And Control Surface - Zoom R8 Interface Manual

Audio interface and control surface

This section explains how to connect the unit with a computer and how to set up and
use the audio interface and control surface functions of the
software
Functions of the audio interface and control surface
INPUT jacks
Guitars and other
musical instruments,
built-in stereo mic
Audio interface
The inputs and outputs can be used
as a Hi-Speed USB 2.0 audio interface
with 2 inputs and 2 outputs at quality
up to 24-bit/96kHz. Effects can be used
when the sampling rate is 44.1 kHz, and
the unit can be powered by a computer's
USB bus.
4
PHONES jack
Playback device like
headphones or an
audio system
USB Cable
with a DAW and other
Windows/Mac
DAW software
Cubase LE, etc.
Audio driver
Control surface functions
Control surface functions can be used
to control DAW software on a computer
via USB. Transport operations, including
playback, recording and stopping, and
physical control of the DAW faders are
possible. Furthermore, various other DAW
software functions can be mapped to the
F1~F5 keys (assignable functions depend
on the DAW used).
OUTPUT jacks
Stereo system,
speakers with built-in
amplifiers, etc.