Using control surface functions
When using the
can be used to control Cubase LE's transport and mixer
About the control surface
In control surface mode, the keys and knobs
on the
can be assigned to particular
Cubase LE functions.
Transport section
About banks
Fader section
HINT
Assigning keys
For a list of functions that can be assigned to the
knobs and keys of the
port/function keys that are supported by Cubase
LE, please consult the "Control surface functions
quick reference guide" in this manual .
Reference: Control surface functions quick
☞
reference guide
10
connected by USB as an audio interface, the
P .11
P .12
P .12
, as well as other trans-
P.15
Control surface setup
See
setup and connection on P.8-9
5
Then, launch Cubase LE.
6
From the Cubase LE "Devices"
menu, select "Device setup..."
Open the "Device Setup..." window.
7
At the top left of the Device setup
window [+], [−] and [|<] buttons
appear. Click the [+] and select
"Mackie Control"
8
Set the MIDI input and output
MIDI input:
MIDI output:
keys and faders
ZOOM R8
ZOOM R8