Working With Patches; Patch Operations; Patch Initialization (Factory Reset) - Zoom R8 Interface Manual

Working with patches

After making many changes, you can restore a patch to its pre-edited settings by
initializing it This will return it to its factory preset condition

Patch operations

For both insert and send return effects
Menus used for patch operations
Selecting patches
INSERT EFFECT/SEND REVERB
Select a patch from an algorithm to use an
insert or send reverb effect.
(Reference:
Operation Manual P .83
Editing patches (EDIT)
By adjusting effect module parameters and
levels, you can create the desired result.
(Reference:
Operation Manual P .84
Importing patches (IMPORT)
All effect algorithms (and reverb patches) or
a single one can be imported from a selected
project on the .
(Reference: Operation Manual P.87)
In audio interface mode, one complete set of effect
data is saved for the mode. There are no project
based settings.
Saving patches (SAVE)
Edited patches can be saved.
(Reference: Operation Manual P.86)
Initializing patches (INITIAL)
Patches can be restored to their original fac-
tory settings. (This option is only available in
audio interface mode.)
Changing patch names (RENAME)
The name of the currently selected patch can
be changed.
(Reference: Operation Manual P.88)
)
)

Patch initialization (factory reset)

EFFECT > INITIAL
1
Press EFFECT.
Selecting effect type
Insert effect
Press the
Send return effect
Press the
The following example is of an insert
effect.
2
Turn the effect
3
INITIAL
Select
Press ENTER.
4
YES
Select .
Press ENTER.
beneath .
beneath .
On .
Change
.
Change
menu
Change
menu
29