Assigning A Sample To A Patch - Zoom 707II Guitar Operation Manual

R P
8.
Press the [ / ] key.
The rhythm pattern of the patch selected in step
7 starts to play. (If an intro type pattern has been
assigned, playback starts when the patch is
switched in step 7.)
9. If necessary, use parameter knobs 2
and 3 to adjust the tempo and volume
of the pattern.
Also when the [PATCH SYNC] key is ON,
parameter knobs 2 and 3 can be used to adjust
the tempo and volume for all patterns. (If
desired, you can also use parameter knob 1 to
switch to manual operation of the pattern.)
Switch the patch.
10.
When you switch the patch while a rhythm
pattern is playing, the pattern continues to play
until the end of the current measure and then
switches to the pattern that is assigned to the
new patch.
Switch to pattern of patch B
Rhythm Pattern of Pattern of
patch A patch A
pattern
Patch Patch A
Switch to other patches in the same way.
To stop rhythm pattern playback,
11.
R P
press the [ / ] key.
If an ending pattern is assigned to a patch, the
pattern will play when switching to the patch,
and then stop.
12.
Press the [PATCH SYNC] key so that
the LED of the key is out.
Pattern of Pattern of
patch B patch B
Patch B
Switch to patch B
A s s i g n i n g a s a m p l e t o a
patch
By assigning a sample stored on SmartMedia
card to a patch, you can have the sample play
every time you select the patch.
1.
Insert the SmartMedia card into the
707II and sample the phrase or source
material that you want to use.
2.
In play mode, select the patch to
which you want to assign a sample,
and press the [EDIT] key.
3.
Use the MODULE [
select the TOTAL module.
The "PATLVL" (patch level) parameter appears
on the display.
4.
Press the [EDIT] key twice.
The [EDIT] key lights up in orange. You can
now use parameter knobs 1 – 3 to control the
following functions.
Lit
Parameter knob 1
Selects the number
of the sample on
the SmartMedia card.
Parameter knob 2
Selects the sample playback
method (n1, n2, P2, n4, P4).
H
INT
For details regarding playback mode, see p. 14.
5.
Use parameter knobs 1 – 3 to select
the sample number, playback method,
and playback level.
ZOOM 707II GUITAR
E R
]/[ ] keys to
Parameter knob 3
Sets the sample
playback level (0 – 30).
27