Zoom B3 Operation Manual page 38

Effect Types and Parameters
036 Bass Pre
037 AC Bs Pre This is a preamp model with a graphic equalizer.
038 SVT
039 B-Man
040 HRT3500 Simulation of the Hartke HA3500 famous for its aluminum cone.
041 SMR
38
This is a preamp model with a semi-parametric equalizer for the mid-range.
Knob1
Bass 0–10
Page01
Adjusts the low frequency level.
Mid -10–10
Page02
Adjusts the middle frequency level.
Knob1
Gain 0–100
Page01
Adjusts the gain.
Bass -10–10
Page02
Adjusts the low frequency level.
Mid -10–10
Page03
Adjusts the middle frequency level.
Simulation of the ultimate rock bass amp, the Ampeg SVT.
Knob1
Bass -10–10
Page01
Adjusts the low frequency level.
Mid_F 32Hz–6.3kHz
Page02
Adjusts the center frequency of the
mid-range.
Off, Low, Hi,
Ultra
Both, Cut
Page03
Emphasizes high and low frequencies. Selects the cabinet.
Simulation of the Fender Bassman 100.
Knob1
Bass -10–10
Page01
Adjusts the low frequency level.
Mid_F 32Hz–6.3kHz
Page02
Adjusts the center frequency of the
mid-range.
Deep On/Off
Page03
Adjusts the low-frequency character.
Knob1
Bass -10–10
Page01
Adjusts the low frequency level.
Mid_F 32Hz–6.3kHz
Page02
Adjusts the center frequency of the
mid-range.
Comp Off,1–10
Page03
Adjusts the amount of compression. Selects the cabinet.
Simulation of the SWR SM-900, famous for its hi-fi sound.
Knob1
Bass -10–10
Page01
Adjusts the low frequency level.
Mid_F 32Hz–6.3kHz
Page02
Adjusts the center frequency of the
mid-range.
ENHNC 0–10
Page03
This tone control changes the frequency
and level according to the knob position.
Knob2
Trebl 0–10
Adjusts the high frequency level.
Freq 100Hz–4.5kHz
Adjusts the center frequency of the
mid-range.
Knob2
Depth 0–10
Adjusts the low frequency level.
L -Mid -10–10
Adjusts the low mid frequency level. Adjusts the L -Mid center frequency.
H-Mid -10–10
Adjusts the high mid frequency level. Adjusts the high frequency level.
Knob2
Mid -10–10
Adjusts the middle frequency level.
Gain 0–100 P Level
Adjusts the gain.
CAB See Table 1
Knob2
Mid -10–10
Adjusts the middle frequency level.
Gain 0–100 P Level
Adjusts the gain.
CAB See Table 1
Selects the cabinet.
Knob2
Mid -10–10
Adjusts the middle frequency level.
TUBE 0–100 P Level
Adjusts the mix of tube and transistor
type sounds.
CAB See Table 1
Knob2
Mid -10–10
Adjusts the middle frequency level.
Gain 0–100 P Level
Adjusts the gain.
CAB See Table 1
Selects the cabinet.
Knob3
Level 0–150 P
Adjusts the output level.
Knob3
Level 0–150 P
Adjusts the output level.
LM_F 32Hz–6.3kHz
Trebl -10–10
Knob3
Trebl -10–10
Adjusts the high frequency level.
0–150
Adjusts the output level.
Mix 0–100
Adjusts the mix balance of the signal after
the pre-amp and the signal after the cabinet.
Knob3
Trebl -10–10
Adjusts the high frequency level.
0–150
Adjusts the output level.
Mix 0–100
Adjusts the mix balance of the signal after
the pre-amp and the signal after the cabinet.
Knob3
Trebl -10–10
Adjusts the high frequency level.
0–150
Adjusts the output level.
Mix 0–100
Adjusts the mix balance of the signal after
the pre-amp and the signal after the cabinet.
Knob3
Trebl -10–10
Adjusts the high frequency level.
0–150
Adjusts the output level.
Mix 0–100
Adjusts the mix balance of the signal after
the pre-amp and the signal after the cabinet.