Using The Looper - Zoom B3 Operation Manual

Using the Looper

1
To activate the Looper
• Press for 1 second.
2
To set the recording time
• Turn on the left unit.
3
To adjust the tempo
• Turn of the middle unit.
26
Manual
Use the footswitch to start and stop recording.
Note mark
Set the recording time by setting the tempo and the number of
quarter notes.
NOTE
• The looper can record 1.5–40 seconds (20 seconds when UNDO is enabled).
• If the setting (number of quarter notes) would not fall in this range,
it will automatically be adjusted.
• Changing the TIME setting will erase the currently recorded loop.
HINT
• You can also set the tempo using .
• If no loop has been recorded yet, you can also set the tempo by
tapping .
NOTE
• The setting range is 40-250.
• Changing the tempo will erase the currently recorded loop.
• This tempo setting is used by every effect, rhythms and the looper.