Restoring The To Its Factory Default Settings - Zoom B3 Operation Manual

3
To complete updating
• When the
• Disconnect the USB cable.
HINT
• Updating the firmware version will not erase saved patches.
Restoring the
1. To use the All Initialize function
• While pressing , set the POWER switch to ON.
• The All Initialize screen appears.
2. To execute the All Initialize function.
• Press .
NOTE
• Press any key other than to cancel.
HINT
• Executing the All Initialize function will restore all the settings of the
defaults. Do not use this function unless you are certain that you want to do this.
has finished updating, "COMPLETE!" appears on the display.
to its factory default settings.
VERSION UPDATE
, including its patches, to factory
31