ActVe DevCes - VTech LS5146 Manual

Bluetooth
Active devices
Only devces on the Active Devices lst can establsh a Bluetooth
• Connected devces
connecton wth the telephone base. Although two pared devces can
appear on the
be connected to the telephone base, only one Bluetooth cell phone or
Active Devices lst
headset can be on a call at a tme.
automatcally.
To enter the Active Devices lst:
1. Press the MENU softkey on the telephone base whle n dle mode.
2. Press the UP and DOWN NavKeys to hghlght Bluetooth, then press
3. Press the DOWN NavKey to hghlght Active Devices, then press the
On the Active Devices lst, you may see the followng status symbols:
•
•
•
Whle n the Active Devices lst, you can select:
•
•
•
•
If you experience difficulty, make sure that the device is on and not connected to any other Bluetooth
devce. See the Troubleshooting secton for more nformaton (page 87).
26
the SELECT softkey to enter the Bluetooth menu.
SELECT softkey.
X n front of the devce ndcates that t s dsconnected.
n front of a devce ndcates that t s connected to the telephone
P
base.
))) n front of a devce ndcates that the telephone base s tryng to
connect to that devce.
CONNECT - Press the CONNECT softkey to connect to a dsconnected devce.
DISCONN - Press the DISCONN softkey to dsconnect a devce.
INFO - Press the INFO softkey to vew the current status and full name of a Bluetooth devce.
OPTIONS - Press the OPTIONS softkey to replace or remove a devce.
www.vtechphones.com
Man Menu
Voce Mal
Intercom
Bluetooth
SELECT
Bluetooth
Set up Cellular
Set up Headset

Actve Devces

SELECT
Actve Devces
x 1 John's Cell
P2 Mary's Headset
CONNECT INFO OPTIONS