VTech LS5146 Manual page 73

Telephone operation
Create a new phone book entry (continued)
Using the telephone base
1. Press the MENU softkey when the telephone base s n dle mode.
2. Press the SELECT softkey to enter the Phone Book menu.
3. Press the NEW softkey to create a new phone book entry.
4. Enter the name (up to 16 characters) by usng the dal pad (0-9). See the character chart on page 67.
• Each tme a dal key s pressed, the characters on that key wll be hghlghted accordng to the
number of key presses. For nstance, for the letter a, press the 2 dial pad key five times.
Press the LEFT and RIGHT NavKeys to move the cursor left and rght.
•
Press the ERASE softkey to backspace and delete a hghlghted character.
•
5. Press the DONE softkey to store the name.
6. Enter the telephone number (up to 32 dgts) by usng the dal pad (0-9).
• Press the LEFT and RIGHT NavKeys to move the cursor left and rght.
• Press the ERASE softkey to backspace and delete a hghlghted dgt.
• Press and hold # untl a P appears on the dsplay to enter a pause.
7. Press the DONE softkey when finished entering the telephone number.
8. Press the SAVE softkey to store the entry.
–OR–
Press the UP and DOWN NavKeys to hghlght and edt the name or number (see steps 4 and 6),
then press the SAVE softkey to store the entry.
www.vtechphones.com
• Press CANCEL at
anytme to dscard
any changes and
return to the Phone
Book menu.
• The dsplay wll
tmeout and return
to the Phone Book
menu f no keys are
pressed wthn 60
seconds.
69